To load with EasyESP:
-
-
- Open Unit
- Solder 4 pin header to serial header
- Connect USB to Serial cable to header
- Close Case
- Hold down button and Connect Power In
- Using latest firmware run esptool.py:
-
sudo python esptool.py --baud 115200 --port /dev/tty.usbserial-FT2IXHL0 write_flash -fm dout 0x0000 ../20191130/bin/ESP_Easy_mega-20191130_normal_ESP8285_1M.bin
-
-
- Power off unit
- Open case
- Remove serial cable from header
- Close Case
- Power On
- Change WIFI to ESP_Easy_0 (password: configesp)
- Configure Unit
-